beautypg.com

Standards compliance for snmp traps, Overview, Trap: warmstart – Paradyne 7112 User Manual

Page 133: Trap: authentificationfailure, Appendix d, For details of snmp traps, Refer to appendix d

background image

D-1

7112-A2-GB20-20

March 1998

Standards Compliance for
SNMP Traps

D

Overview

This section describes the unit’s compliance with SNMP standards and any
special operational features for the SNMP traps supported. The unit supports the
following user interface traps and enterprise-specific traps:

Trap: warmStart

SNMP Trap

Description

Possible Cause

warmStart

The unit has reinitialized
itself.

The trap is sent after the
unit resets and stabilizes.

There are no
variable-bindings.

H

Reset command.

H

Power disruption.

Trap: authentificationFailure

Along with the authenticationFailure MIB, a string is returned that identifies the IP
address of the workstation that attempted to access the unit.

NOTE:

To display the address of the workstation that attempted to access the unit,
you must customize your SNMP trap by adding $1 after authentication failure.