Paradyne 7112 - Manual (Page 108)

MIB Descriptions
C-6 7112-A2-GB20-10 March 1998
Table C-2. Interfaces Group Objects (4 of 5)
Object Setting/Contents Description
ifOperStatus
( ifEntry 8 )
1.3.6.1.2.1.2.2.1.8 Specifies the current
operational state of the
interface. Read/Write H Ethernet port
– up(1) – No alarms
– down(2) – Alarms
– testing(3) – Test active
H Terminal port. Always up(1); never
in testing(3) state.
H User Data Port
– up(1) – No alarms
– down(2) – Alarms
– testing(3) – Test active
H DS1 Network Interface
– up(1) – DTR on, if supported by
the DTE
– down(2) – DTR off, if supported
by the DTE
– testing(3) – Test active
H Facility Data Link (FDL). When
enabled, up and down are based
on the current state of the physical
and link layer protocols.
– up(1) – Operational and no
active test on the DS1 network
interface
– down(2) – Not operational or
disabled
– testing(3) – Test active on DS1
network interface
ifLastChange
( ifEntry 9 )
1.3.6.1.2.1.2.2.1.9 Indicates the amount
of time the interface
has been up and
running. Contains the value of sysUpTime
object at the time the interface
entered its current operational state.
ifInOctets (ifEntry 10)
1.3.6.1.2.1.2.2.1.10
Collects input statistics
on data received by
the interface An integer number.
ifInUcastPkts
(ifEntry 11)
1.3.6.1.2.1.2.2.1.11
the interface.
Applies to the FDL and
th Eth
t t
ifInDiscards
(ifEntry 13)
1.3.6.1.2.1.2.2.1.13
Applies to the FDL and
the Ethernet port.
Statistics are not
collected if the
Ethernet port is
di
bl d
ifInErrors (ifEntry 14)
1.3.6.1.2.1.2.2.1.14
Ethernet port is
disabled.
ifInUnknown
Protos
(ifEntry 15)
1.3.6.1.2.1.2.2.1.15