Paradyne 7112 - Manual (Page 123)

MIB Descriptions
C-21 7112-A2-GB20-20 March 1998
Table C-11. General Port Table Objects
Object, OID, Access Description Setting/Contents
rs232PortType
(rs232PortEntry 2 )
1.3.6.1.2.1.10.33.2.1.2
read-only
Identifies the port hardware
type. Supports only the following
values:
rs232(2) – Identifies the
Terminal port.
v35(5) – Identifies the
synchronous User Data port
which is compatible with the
V.35 standard.
rs232PortInSigNumber
(rs232PortEntry 3 )
1.3.6.1.2.1.10.33.2.1.3
read-only
Contains the number of
input signals (in the input
signal table) that can be
detected. The value is 2 for synchronous
user data port and 0 for the
Terminal port.
rs232PortOutSigNumber
(rs232PortEntry 4 )
1.3.6.1.2.1.10.33.2.1.4
read-only
Contains the number of
output signals (in the output
signal table) that can be
asserted. The value is 3 for synchronous
User Data port and 0 for the
Terminal port.
rs232PortOutSpeed
(rs232PortEntry 6 )
1.3.6.1.2.1.10.33.2.1.6
read-write
Contains the port’s output
speed in bits per second.
The rs232PortOutSpeed
object has the same values
as the rs232PortInSpeed
object.
Supports the following speeds
for the Terminal port: 2400,
4800, 9600,14,400, 19,200,
28,800, 38,400.
The following are not supported:
H
rs232PortInFlowType (rs232PortEntry 7 )
H
rs232PortOutFlowType (rs232PortEntry 8 )