Paradyne 7112 - Manual (Page 153)

IN-1 7112-A2-GB20-20 March 1998
Index
Numbers
10BaseT cable, E-3
10BaseT port. See Ethernet port
A
ac power module, F-2
access
SNMP, 1-3, 4-6
to async terminal interface, 2-3, 4-4
access to user interface, resetting/restoring, 4-3
AIS (Alarm Indication Signal) condition, status
message, 6-7
alarm, condition, 7-1
alarm LED, 6-4
alarm messages, 8-1
AMI line coding, A-3
ASCII
alarm, 7-1
printable characters, 3-1
ATI (async terminal interface)
exiting, 2-7
initiating, 2-2
B
B8ZS (Bipolar Eight Zero Substitution) coding, A-3
B8ZS/LOS Fail, status, 6-8
bit stuffing, A-4
C
CA81A network interface cable, E-2
cables
Ethernet, E-3
rear panel, E-1
cables to order. See Start-Up Instructions
cabling example, 1-4
channel allocation, 3-4
configuration options, A-7
Clear command, 6-6
clocking, A-3, A-8
ClrStats command, 6-6
COM port, resetting, 4-3
community names, 4-6
configuration
example, 1-2
option tables, A-1
option worksheets, B-1
configuration changes, saving, 3-3
Configuration menu, 3-3
connectors, 1-4
10BaseT port, E-3
rear panel, E-1
create login ID, 4-2
cross connect assignments, 3-4
Cross Connect Status, 6-10
crossover cable, E-4
CTS, clear to send LED, 6-5
customer configuration areas, 3-2
D
data channel loopback (DCLB), 7-9, A-10
data port loopbacks, DTE initiated, A-10
data port options, A-8
data port tests, 7-7
data rate, terminal port, A-12
data terminal loopback (DTLB), 7-8, A-10
default configuration area, 3-2
device
messages, 8-2– 8-3
name, 3-1
device fail, status message, 6-7
dial-in, external device access, 4-1
dimensions, F-2
DS0 channel allocation. See channel allocation
DTE interface port location, 1-4
DTE port tests, 7-7
DTR, data terminal ready LED, 6-5
DS1/E1 MIB, C-13