Paradyne 7112 - Manual (Page 107)

MIB Descriptions
C-5 7112-A2-GB20-20 March 1998
Table C-2. Interfaces Group Objects (3 of 5)
Object Setting/Contents Description
ifSpeed
( ifEntry 5 )
1.3.6.1.2.1.2.2.1.5 Provides the current
bandwidth for the
interface in bits per
second. H Ethernet Port – The data rate for
the port.
H Terminal port – Configured data
rate for the port.
H DS1 – Line rate of 56,000 or
64,000 bps, reflecting the line rate
detected by the unit.
H User data (DTE) port – Current
data rate of the port (DS1
operating rate minus FDL).
H Facility Data Link – When FDL is
enabled, the data rate is 4 Kbps.
When FDL is disabled, the data
rate is zero.
ifAdminStatus
( ifEntry 7 )
1.3.6.1.2.1.2.2.1.7 Provides interface
status. Supported as
read-only. H up(1) – The interface is enabled.
H down(2) – The interface is
disabled.
H Ethernet Port – always down(2).
H Terminal port – always up(1).
H User data (DTE) port – always
up(1).
H DS1 Network – always up(1).
H Facility Data Link – Up(1) when
FDL enabled, down(2) when FDL
disabled.