Paradyne 7112 - Manual (Page 124)

MIB Descriptions
C-22 7112-A2-GB20-10 March 1998
Asynchronous Port Table Objects
The Asynchronous Port Table Objects contains an entry for the Terminal port. For
this unit, entries in the table that are counters (rs232AsyncPortEntry 6–8) are
used to collect statistics only and are not supported.
Table C-12. Asynchronous Port Table Objects
Object, OID, Access Description Setting/Contents
rs232AsyncPortBits
(rs232AsyncPortEntry 2 )
1.3.6.1.2.1.10.33.3.1.2
read-write
Specifies the number of bits
in a character. Supports only the following
values:
7 – 7-bit characters
8 – 8-bit characters
rs232AsyncPortStopBits
(rs232AsyncPortEntry 3 )
1.3.6.1.2.1.10.33.3.1.3
read-write
Specifies the number of
stop bits supported. Supports only the following
values:
one(1) – One stop bit
two(2) – Two stop bits
rs232AsyncPortParity
(rs232AsyncPortEntry 4 )
1.3.6.1.2.1.10.33.3.1.4
read-write
Specifies the type of parity
used by the port. Supports only the following
values:
none(1) – No parity bit
odd(2) – Odd parity
even(3) – Even parity
rs232AsyncPortAuto-
Baud
(rs232AsyncPortEntry 5 )
1.3.6.1.2.1.10.33.3.1.5
read-write
Specifies the ability to
automatically sense the
input speed of the port. Supports only the following
values:
disabled(2) – Does not
support Autobaud.