Paradyne 7112 - Manual (Page 18)

Using the ASCII Terminal Interface (ATI)
2-4 7112-A2-GB20-20 March 1998
Navigating
You can navigate the screens by:
H Using keyboard keys
H
Using screen function keys
H Switching between the two screen work areas
Configuration
Edit/Display
• System
• Network
• Cross Connect
• Data Port
• Ethernet Port
• Terminal Port
• Telnet Session
• SNMP
Status
• System and Test Status
• Network Performance Statistics
• Cross Connect Status
• Ethernet Port Status
• Management Protocol Satistics
• Display LEDs
• Identity
Test
• Network Tests
• Data Port Tests
• Lamp Test
• Abort Tests
SNMP
• General SNMP Management
• SNMP NMS Security
• SNMP Traps
Control
• Device Name
• Administer Logins
• Reset Device
MAIN MENU
Status
Test
Configuration
Control
97-15686
Load Configuration
from . . .
Keyboard Keys
Use the following keyboard keys to navigate within the screen.
Press . . . To . . .
Ctrl-a Move cursor between the screen area and the screen function
keys area below the dotted line at the bottom of the screen.
Esc Return to the previous screen.
Tab Move cursor to the next field on the screen.
Backspace Move cursor to the previous field on the screen.