Hour totals, Ethernet port status – Paradyne 7112 User Manual

Page 56

Monitoring the DSU/CSU

6-14

7112-A2-GB20-20

March 1998

24-Hour Totals

The last two lines on the screen (above the dotted line) display the totals for each
statistic over the last 24 hours, along with the number of valid intervals included in
the total (up to 96).

Ethernet Port Status

To view the Ethernet (10BaseT) Port Status, follow this menu selection sequence:

Main Menu

→

Status

→

Ethernet Port Status

ООООООООООООООООООООООООО

main/status/ethernet PARADYNE

Device Name: Model: 7112

ETHERNET PORT STATUS

Port Use:

Version 2

IP Address:

000.000.000.000

Subnet Mask:

000.000.000.000

Default Gateway Address:

000.000.000.000

Ethernet MAC Address:

00:00:00:00:00:00

Frames Transmitted:

0000000000

Frames Received:

0000000000

Errored Frames:

0000000000

Excessive Collisions:

0000000000

Carrier Sense Errors:

0000000000

Deferred Transmissions:

0000000000

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

ESC for previous menu MainMenu Exit

Refresh ClrStats

Table 6-5 describes the fields on the Ethernet Port Status screen.

Table 6-5.

Ethernet Port Status Screen Contents (1 of 2)

Label

What the Field Indicates

Port Use

The port is enabled if 802.3 or Version 2 is displayed. The
port is disabled if Disable is displayed.

IP Address

The IP address of the port.

Subnet Mask

The subnet mask to be used with the IP address.

Default Gateway Address

The gateway to be used for packets that do not have a
route.

Ethernet MAC Address

The physical address of the port.

Frames Transmitted

The number of frames transmitted.

Frames Received

The number of frames received.