Pick mode, Stand mode sensitivity, Pick mode stand mode sensitivity – Datalogic QuickScan I QD2400 User Manual

Page 90: Pick, Default

Enter/Exit Programming Mode

Scanning Features

QuickScan™ I QD24XX/QBT24XX/QM24XX

Pick Mode

Specifies the ability of the reader to decode labels only when they are close to the center of the

aiming pattern. This allows the reader to accurately target labels when they are placed close

together, such as on a pick sheet.

NOTE

This feature is not compatible with Multiple Labels Reading in a Volume.

DEFAULT

$CSNPM00(CR)

Pick Mode = Disable

$CSNPM01(CR)

Pick Mode = Enable

Stand Mode Sensitivity

Sets the sensitivity level for stand mode wakeup. Choices are low, medium and high.

$CSMSE00(CR)

Stand Mode Sensitivity = Low

$CSMSE01(CR)

Stand Mode Sensitivity = Medium

DEFAULT

$CSMSE02(CR)

Stand Mode Sensitivity = High