Configuration updates, Automatic configuration update, Copy configuration to scanner – Datalogic QuickScan I QD2400 User Manual
Page 229: Onfiguration, Pdates, Default
WIRELESS FEATURES
Enter/Exit Programming Mode
Product Reference Guide
219
CONFIGURATION UPDATES
in “References” for detailed information and examples of these features.
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can automatically ensure they
stay in sync with regard to application hardware and/or configuration.
$CBTCU00(CR)
Automatic Configuration Update = Disable
$CBTCU01(CR)
Automatic Configuration Update = Enable
DEFAULT
Copy Configuration to Scanner
Scan the following label to copy the current Base Station configuration to the scanner. Use this
method when the Auto Configuration Update feature is disabled and you want a one-time con-
figuration update to be performed on the scanner.
NOTE
$CCpyCfg2HH
Copy Configuration to Scanner
Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunction with this bar code.