Customizing configuration settings, Configure interface settings, Global interface features – Datalogic QuickScan I QD2400 User Manual
Page 32: Configuring other features, Software version transmission, Symbology-specific parameters
Setup
22
QuickScan™ I QD24XX/QBT24XX/QM24XX
Customizing Configuration Settings
Configure Interface Settings
If after scanning the interface bar code from the previous table, your installation requires you to
select options to further customize your reader, turn to the appropriate section for your inter-
face type in
•
•
•
Global Interface Features
Global Interface Features" on page 27
for settings configurable by all interface types.
Configuring Other Features
If your installation requires different programming than the standard factory default settings,
the following sections of this manual allow configuration of non-interface-specific settings you
might require:
:
Data Format offers options to control the messages sent to the Host system.
:
Reading Parameters include programming for scanning, beeper and LED
indicators and other universal settings.
Symbology-Specific Parameters
Includes options concerning the bar code label types (symbologies). These
settings allow you to enable/disable symbologies, set label lengths, require check digit, etc.
Includes options concerning the bar code label types (symbologies). These
settings allow you to enable/disable symbologies, set label lengths, require check digit, etc.
Software Version Transmission
The software version of the device can be transmitted over the RS-232 and Keyboard interfaces
by scanning the following label.
Transmit Software Version
RevA