Character conversion, Haracter, Onversion – Datalogic QuickScan I QD2400 User Manual

Page 78: Default

Text mode
Original mode

Enter/Exit Programming Mode

QuickScan™ I QD24XX/QBT24XX/QM24XX

Character Conversion

Character conversion is an eight byte configuration item. The eight bytes are 4 character pairs

represented in hexadecimal ASCII values. The first character in the pair is the character that will

be converted. The second character in the pair is the character to convert to. If the character to

convert in a pair is FF, then no conversion is done.

NOTE

$CLFCH

Configure Character Conversion

DEFAULT

0xFFFFFFFFFFFFFFFF

(No character conversion)

If less than the expected string of 16 characters are selected, scan the ENTER/EXIT bar
code twice to accept the selections and exit Programming Mode.