Maxicode set length 2, Default – Datalogic QuickScan I QD2400 User Manual
Page 205
Symbology Selection
Enter/Exit Programming Mode
Product Reference Guide
195
Maxicode Set Length 2
This feature specifies one of the bar code lengths for
Maxicode Length Control on page 194
Length 2 is the maximum label length if in Variable Length Mode, or the second fixed length if
in Fixed Length Mode. Characters can be set from 0001 to 0145 characters in increments of
0001 (pad with zeroes).
See
for detailed instructions on setting this feature.
$CMXL2
Select Maxicode Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
representing
your desired character(s). End by scanning the ENTER/
EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
Length 2 is 0145 Characters