Datalogic QuickScan I QD2400 - Manual (Page 115)

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 105
ADD-ONS
Contact Customer Support for advanced programming of optional and conditional add-ons.
Optional Add-ons
The reader can be enabled to optionally read the following add-ons (supplementals):
NOTE
DEFAULT
$CADO200(CR)
Optional Add-Ons = Disable P2
$CADO201(CR)
Optional Add-Ons = Enable P2
DEFAULT
$CADO500(CR)
Optional Add-Ons = Disable P5
$CADO501(CR)
Optional Add-Ons = Enable P5
Cordless models only:
DEFAULT
$CADO800(CR)
Optional Add-Ons = Disable GS1-128
$CADO801(CR)
Optional Add-Ons = Enable GS1-128
If a UPC/EAN base label and an add-on are both decoded, the reader will transmit the base
label and add-on. If a UPC/EAN base label is decoded without an add-on, the base label will
be transmitted without an add-on. Conditional add-on settings (if enabled) are considered by
the reader before optional add-on settings.