2d symbologies, 2d global features – Datalogic QuickScan I QD2400 User Manual
Page 191
Product Reference Guide
181
2D SYMBOLOGIES
2D Global Features
•
2D Maximum Decoding Time on page 182
•
2D Normal/Inverse Symbol Control on
•
2D Structured Append on page 183
The reader supports the following 2D symbologies (bar code types). Symbology-dependent
options for each symbology are included in this chapter. See
for configuration of 1D bar codes.
2D Symbologies
•
•
•
China Sensible Code on page 187
•
•
•
•
•
•
•
Postal Code Selection on page 210
2D Global Features
The following features are common to all, or in some cases, most of the available 2D symbolo-
gies. Default settings are indicated at each feature/option with a green arrow. Also reference
for a listing of the most widely used set of standard factory set-
tings. That section also provides space to record any custom settings needed or implemented
for your system.
To set most features:
1. Scan the ENTER/EXIT PROGRAMMING bar code at the top of applicable programming
pages.
2. Scan the correct bar code to set the desired programming feature or parameter. You may
need to cover unused bar codes on the page, and possibly the facing page, to ensure that
the reader reads only the bar code you intend to scan.
3. If additional input parameters are needed, go to
, and scan the appro-
priate characters from the keypad.
NOTE
Additional information about many features can be found in the “References”
chapter.
If you make a mistake before the last character, scan the CANCEL bar code to
abort and not save the entry string. You can then start again at the beginning.
Complete the programming sequence by scanning the ENTER/EXIT PROGRAMMING bar code to
exit Programming Mode.