Standard 2 of 5 set length 2, Default – Datalogic QuickScan I QD2400 User Manual
Page 150
Enter/Exit Programming Mode
Standard 2 of 5
140
QuickScan™ I QD24XX/QBT24XX/QM24XX
Standard 2 of 5 Set Length 2
This feature specifies one of the bar code lengths for
Standard 2 of 5 Length Control on page
. Length 2 is the maximum label length if in
Variable Length on page 138
Mode, or the sec-
ond fixed length if in
Mode. Length includes the bar code’s check
and data characters.
The length can be set from 1 to 50 characters. A setting of 0 specifies to ignore this length
(only one fixed length).
provides examples for setting Length 2. See
for detailed instructions on set-
ting this feature.
Table 10. Standard 2 of 5 Length 2 Setting Examples
STEP
ACTION
EXAMPLES
1
Desired Setting (pad with
leading zeroes)
00 (Ignore This
Length)
07 Characters
15 Characters
50 Characters
2
Scan ENTER/EXIT PROGRAMMING MODE
3
Scan SELECT STANDARD 2 OF 5 LENGTH 2 SETTING
4
Scan Two Characters From
‘0’ and ‘0’
‘0’ and ‘7’
‘1’ and ‘5’
‘5’ AND ‘0’
5
Scan ENTER/EXIT PROGRAMMING MODE
$CS2L2
Select Standard 2 of 5 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
50 = Length 2 is 50 Characters