Upc-a 2d component, Upc-e, Upc-e enable/disable – Datalogic QuickScan I QD2400 User Manual
Page 104: Default
Enter/Exit Programming Mode
UPC-E
94
QuickScan™ I QD24XX/QBT24XX/QM24XX
UPC-A 2D Component
This feature enables/disables a requirement that a 2D label component be decoded when a
base label of this symbology is decoded.
DEFAULT
$CAB2D00(CR)
EAN-13 2D Component =
Disable (2D component not required)
$CAB2D01(CR)
EAN-13 2D Component =
2D component must be decoded
UPC-E
The following options apply to the UPC-E symbology.
UPC-E Enable/Disable
When disabled, the reader will not read UPC-E bar codes.
$CEBEN00(CR)
UPC-E = Disable
$CEBEN01(CR)
UPC-E = Enable
DEFAULT