Datalogic QuickScan I QD2400 User Manual
Page 36
Enter/Exit Programming Mode
26
QuickScan™ I QD24XX/QBT24XX/QM24XX
3. If additional input parameters are needed, go to
, and scan the appro-
priate characters from the keypad.
NOTE
Additional information about many features can be found in the “References” chap-
ter.
If you make a mistake before the last character, scan the CANCEL bar code to abort
and not save the entry string. You can then start again at the beginning.
4. Complete the programming sequence by scanning the ENTER/EXIT PROGRAMMING bar
code to exit Programming Mode.
For more detailed descriptions, programming information and examples for setting selected
configuration items, see
References, starting on page 239
NOTE
By default, the handheld will decode bar code labels only when they are close to the
center of the aiming pattern. This allows the handheld to accurately target labels
when they are placed close together, such as on a pick sheet. See
.