Ack nak error handling, Indicate transmission failure, Ack nak e – Datalogic QuickScan I QD2400 User Manual
Page 49: Rror, Andling, Ndicate, Ransmission, Ailure, Default
RS-232/USB-Com Interfaces
Enter/Exit Programming Mode
Product Reference Guide
39
ACK NAK Error Handling
This feature specifies the method the reader uses to handle receive errors detected while wait-
ing for an ACK character from the host.
DEFAULT
$CR2EH00(CR)
ACK NAK Error Handling = Ignore Errors Detected
$CR2EH01(CR)
ACK NAK Error Handling =
Process Error as Valid ACK Character
$CR2EH02(CR)
ACK NAK Error Handling = Process Error as
Valid NAK Character
Indicate Transmission Failure
This option enables/disables the reader’s ability to sound an error beep to indicate a transmis-
sion failure while in ACK/NAK mode
$CR2TF00(CR)
Indicate Transmission Failure = Disable Indication
$CR2TF01(CR)
Indicate Transmission Failure = Enable Indication
DEFAULT
.