Host connection, Figure 8. connecting to the host, Or... power connection – Datalogic QuickScan I QD2400 User Manual
Page 24
Setup
14
QuickScan™ I QD24XX/QBT24XX/QM24XX
Figure 7. Connecting the Base Station
Base
Station
I/F Cable
AC/DC
Adapter
DC Power
Cord
Wall plug
Connector
Host Connection:
Verify before connection that the reader’s cable type is compatible with your
host equipment.
Most connections plug directly into the host device as shown in
Figure 8
. Keyboard Wedge
interface cables have a ‘Y’ connection where its female end mates with the male end of the
cable from the keyboard and the remaining end at the keyboard port on the terminal/PC.
Figure 8. Connecting to the Host
US
B
IB
M
K
ey
bo
ard
W
ed
ge
W
an
d
or...
or...
or...
Power Connection:
Plug the AC Adapter into an approved AC wall socket with the cable facing
downwards (as shown in
Figure 7
) to prevent undue strain on the socket.