Other bt features, Bluetooth hid variable pin code, Default – Datalogic QuickScan I QD2400 User Manual

Page 237

Bluetooth-Only Features

Enter/Exit Programming Mode

Product Reference Guide

227

OTHER BT FEATURES

Bluetooth HID Variable PIN Code

Specifies the selection available for Static or Variable Pin Code, when Bluetooth HID profile is

configured.
Some Bluetooth drivers on the Host (such as WIDCOMM and BlueSoleil 8) require a Variable PIN

Code. When attempting connection, the application presents a window that includes a PIN Code

which is to be input using the QuickScan QBT24xx. Scan the bar code "Variable PIN Code"

below, then use the host computer’s Bluetooth manager to “Discover new devices” and select

"Datalogic Scanner." Use a text editor to see incoming data on the port designated by the com-

puter's Bluetooth manager.

If you receive an error message, it may be necessary to disable
security on the device.

When you hear the beep and see the Green LED blinking indicating the reader is waiting for an

alphanumeric entry, enter the required variable PIN Code by scanning the corresponding bar

codes in

for alphanumeric entry. Finish by scanning the Exit HID Variable

PIN Code label.

$CBTHP00

Set Static Pin Code

DEFAULT

$CBTHP01

Set Variable Pin code

CANCEL

Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.

Exit HID Variable PIN Code