Individually set label id, Label id control, Default – Datalogic QuickScan I QD2400 User Manual
Page 71
Data Format
Enter/Exit Programming Mode
Product Reference Guide
61
Individually Set Label ID
This feature configures a Label ID individually for a single symbology. To set, first define
whether you want it as a prefix or suffix by scanning a label below. Then turn to
bology Selection − 1D Symbologies, starting on page 62
to select the symbology you want to
set, followed by up to 3 characters from the ASCII Chart at the back of this manual. See "
ID: Set Individually Per Symbology" on page 258
for detailed instructions on setting this feature.
Label ID Control
This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given sym-
bology type.
DEFAULT
$CIDCO00(CR)
Label ID Transmission = Disable
$CIDCO01(CR)
Label ID Transmission = Enable as Prefix
$CIDCO02(CR)
Label ID Transmission = Enable as Suffix