Micro qr code set length 2, Micro qr code, Default – Datalogic QuickScan I QD2400 User Manual
Page 217: Set length 2
Symbology Selection
Enter/Exit Programming Mode
Product Reference Guide
207
Micro QR Code
Set Length 2
This feature specifies one of the bar code lengths for
Micro QR Code Length Control on page
. Length 2 is the maximum label length if in Variable Length Mode, or the second fixed
length if in Fixed Length Mode. Characters can be set from 0001 to 0035 characters in incre-
ments of 0001 (pad with zeroes).
See
for detailed instructions on setting this feature.
$CMQL2
Select QR Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code at
left followed by the digits from the Alphanumeric char-
acters in
representing your
desired character(s). End by scanning the ENTER/EXIT
bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
Length 2 is 0035 Characters