Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 97)

Quick Reference
4.3.1 Displaying Default Data
4-12
4
4.3 Default Data
Values set in the Setup Wizard determine the displayed data in Quick Reference as the default
data.
4.3.1 Displaying Default Data
Default data will be displayed in the following two cases.
• Quick Reference is displayed after making settings in the Setup Wizard.
• All Reset (R) is selected in Quick Reference.
Refer to 4.2.4 Deleting and Resetting Data for information on resetting data.
4.3.2 Displayed Pages
Quick Reference displays the following pages by default.
The following section provides information on the default display data and data editing of
each page.
4.3.3 Register List
„ Displaying Register List Page
The following Register List page will be displayed by default.
1. The number of register data items specified by /D will be displayed in the format speci-
fied by /TYPE from the register specified by the register number (including /DWG if
necessary).
2. The data will be displayed by default on the left-hand side of the screen.
„ Default Data Example
The name of the model set in the Setup Wizard 1: Select the Controller Window will be dis-
played. The present register value will be displayed for each register.
Page Description
Register List Displays the specified number of register data items from the specified
register.
MPM Status Displays the operating status of the specified drawing.
Positions Displays the present value of each axis.
Motion or Servo Driver
Alarm Displays alarm data.
Troubleshooting Displays data on each axis. A page is displayed for each axis.
Time Chart Displays the time chart of specified register data on the specified
drawing.