Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 80)

Controller Configuration
3.2.4 Module Information
3-10
3
„ Module Information
The Module Information Window will be displayed when the Module Information Button
is clicked.
The window has the following configuration.
1. Servo Control Module
Select the model from the drop-down list of Servo Control Modules.
2. Module Information
The module configuration data will be displayed.
The following description provides detailed information on the window configuration.
„ Selecting Servo Control Module
By selecting the model from the drop-down list of Servo Control Modules, the data on the
configuration of the selected Servo Control Module will be displayed in the box.
Items selected from the drop-down list vary with the Machine Controller.
MP910
The drop-down list of Servo Control Modules always displays the following two items.
1. 01: ch#1
This indicates SVB-CHI in Setup Wizard 4: Module Configuration Window.
If this item is selected, detailed data on SVB-CH1 configuration allocations will be dis-
played.
1.
2.