Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 59)

2.5.2 Definitions
2-47
2
2.5.2 Definitions
The Definition Window is described in detail below.
Fig 2.17 Setup Wizard 2: Definition
1. Define System Modules
Select the name of the module setting template from the drop-down list.
The comment set in the selected module setting template will appear under the box.
1 Select the new user definition when newly setting a Module.
2 If there is a registered MP940 module setting template, the defined names will be listed together with a
selection for a new user definition. If a MP940 module setting template has not been registered, only a
selection for a new user definition will appear.
2. Check Box to Modify System Modules
Check the box if the module settings need changes.
Changes in the Setup Wizard 4: Module Configuration Window will be possible only if
this box is checked.
The above operation is possible only if a registered module setting template has been selected instead
of a new user definition.
3. Controller Name
Set the name of the Machine Controller.
“01" will be added to the input character string to form the name of the Machine Con-
troller.
1.
2.
3.
4.
8.
5. 6. 7.
INFO
INFO