Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 74)

Controller Configuration
3.1.2 Starting the Controller Configuration
3-4
3
4. Double-click Controller Configuration under the Definition Folder of the Machine
Controller to be started.
The Engineering Manager will start and the Controller Configuration Window of the
specified Machine Controller will be displayed.
Note: The above diagram shows the Controller Configuration Window of
the MP01 Machine Controller in GROUP910.
„ Engineering Manager Already Running
If the Engineering Manager is already running, use the following procedure to display the Controller
Configuration Window.
Click CFG (i.e., the circled portions in the window below) on the Screen Toolbar or Standard Toolbar
or select File (F), Open (O), Definition (D), and then Controller Configuration (L).
The Controller Configuration Window will be displayed in the Engineering Manager.
INFO
Screen Toolbar
Standard
Toolbar