Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation User Manual
Page 44
Setup Wizard
2.3.4 Module Settings
2-32
2
Communications Module Icon
The Communications Module icons are circled in the above illustration.
If multiple CPU settings have been specified, the Multi CPU Dialog Box will appear by dou-
ble-clicking the Communications Module icon. Select the CPU that will be in control of the
Communications Module.
It will be possible to make duplicate settings for the Modules or communications path if two
or more CP-215 Communications Modules are allocated next to each other on the rack.
Use the following procedure to make the settings.
Duplicate Settings for CP-215 Modules
1. Right-click the CP-215 icon.
2. Select Duplicate module (M) from the displayed pop-up menu.
In the above case, two CP-215 Modules must be mounted next to each other on the rack,
or otherwise the following message box will appear. When the message box appears,
repeat the Communications Module settings from the beginning.
Duplicate Settings for CP-215 Communications Path
1. Right-click the CP-215 icon.
2. Select Duplicate line (L) on the displayed pop-up menu.
In the above case, two CP-215 Modules must be mounted next to each other on the rack,
or otherwise the following message box will appear. When the message box appears,