Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 111)

Quick Reference
4.4.3 Registering from DWG
4-26
4
4.4.3 Registering from DWG
Registers used in the DWG can be registered into Quick Reference.
When a symbol or comment for the register number is input into Quick Reference, data on
the symbol or comment will be reflected to the DWG.
The following description provides information on the registration of the numbers of regis-
ter.
„ Registering Register Numbers (DWG to Quick Reference)
1. Open the DWG file with the Engineering Manager.
2. Select the register number to be registered with Quick Reference, move the cursor, and
right-click.
3. Select Register Add (A) from the pop-up menu.
The following illustration is an example of selecting DB00100A in the DWG.
When the above steps are taken, the register number (i.e., DB00100A in the above
example) will be registered to the selected and activated watch page in Quick Reference.
The selected number of register and data on the register number will be added to the end
of the list, as shown by the arrow below.