Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 66)

2.5 MP940 Setup Wizard
2-54
2
If the 260IF is set for communications, only the following image will be displayed.
2. I/O Units and Allocation Check
Data on the number and allocation of the I/O Units will be displayed.
The settings can be checked only, and they cannot be changed here.
3. Check Box to Register as the New Module Configuration
Check the box to register a new module configuration.
The following window will be displayed.
a) Registration
Set the name of the Module to be registered.
Up to 64 characters can be input.
a)
b)