Overview – Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation User Manual
Page 7

Overview
ix
Overview
About this Manual
This manual describes the operation of the simple version of the CP-717 Engineering Tool, a
programming software package that aids in the design and maintenance of MP900-series
Machine Controllers.
The main information provided in this manual is as follows:
• Functions
• Settings and operation methods
Refer to the standard version of the MP900 Series Programming Software User's Manual
(SIEZ-C887-2.4) for the operation of the whole CP-717.
The simple version applies to the following Machine Controllers.
• MP910,MP920,MP920-02,MP930,MP930-02,and MP940 Machine Controllers
Read this manual carefully to ensure the proper use of the CP-717 Engineering Tool. Also,
keep this manual in a safe place so that it can be referred to whenever necessary.
Related Manuals
Refer to the following related manuals as required.
Manual name
Manual Number
Contents
MP900 Series Machine Controller
User’s Manual:
CP-717 Programming Panel Software
(for standard operation)
SIEZ-C887-2.4
Describes the installation and operating
procedures for the CP-717 Program-
ming Panel software used for MP900
Series Machine Controllers.
MP910 Machine Controller
User’s Manual:
Design and Maitenance
SIEZ-C887-3.1
Describes the design and maintenance
for the MP910 Machine Controller.
MP920 Machine Controller
User’s Manual:
Design and Maitenance
SIEZ-C887-2.1
Describes the design and maintenance
for the MP920 Machine Controller.
MP930 Machine Controller
User’s Manual:
Design and Maitenance
SIEZ-C887-1.1
Describes the design and maintenance
for the MP930 Machine Controller.
MP940 Machine Controller
User’s Manual:
Design and Maitenance
SIEZ-C887-4.1
Describes the design and maintenance
for the MP940 Machine Controller.
MP900 Series Machine Controller
User’s Manual:
Ladder Programming
SIEZ-C887-1.2
Describes the instructions used in
MP900 Series ladder logic program-
ming.
MP900 Series Machine Controller
User’s Manual:
Motion Programming
SIEZ-C887-1.3
Describes the motion programming lan-
guage used for MP900 Series Machine
Controllers.