Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 113)

Quick Reference
4.4.4 Editing List Page Data
4-28
4
4.4.4 Editing List Page Data
The following description explains each data item and set values that can be input for list
pages.
The illustration below is the Register List page.
1. Register Number
• Data: The start number of register where data is displayed or set.
• Set value: Input the register number.
2. /DWG
• Data: The name of the DWG where the register number exists.
• Set value: Input the DWG name.
If the D register is set for the register number, be sure that the D register is
set because the D register is a unique register for the DWG. Any other set
value will be ignored.
3. /D
• Data: The number of registers where data is displayed or set.
6.
1. 2. 3. 4. 5.