Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 62)

2.5 MP940 Setup Wizard
2-50
2
1. Check Box for Online
Check the box for online specification.
The following window will be displayed.
a) Logical Port No.
Select the logical port number from the drop-down list.
The list will show the CP-217 (serial) port as communications ports available to the
MP940. Any other port will be displayed as an undefined port.
b) Network Setting Tab
The tab number specified by the controller number setting in the Setup Wizard 2:
Definition Window will be displayed.
c) Unit No.
If the logical port number is set to CP-217, select the unit number for each Machine
Controller from the drop-down list.
a)
b)
c)