Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 56)

Setup Wizard
2.4.5 Settings Checks
2-44
2
1. Overall Image
The overall image of module settings will be displayed.
The number of Servos and I/O Units and allocations are reflected in the displayed Ser-
vos and I/O Units on the screen.
2. Servo and I/O Allocation Check
Data on the number and allocation of the Servos and I/O Units will be displayed.
The settings can be checked only, and they cannot be changed here.
3. Check Box to Register as the New Module Configuration
Check the box to register a new module configuration.
The following window will be displayed.
a) Registration
Set the name of the Module to be registered.
Up to 64 characters can be input.
b) Comment
Set the comment about the Module.
Up to 64 characters can be input.
4. Check Box to Download the Created Configuration Data to the Controller
Check the box to download to the Machine Controller the system configuration data cre-
ated with the Setup Wizard.
The box will appear only if the Online Specification check box in the Setup Wizard 3:
Network Settings Window is checked.
a)
b)