Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 69)

2.7.1 Generation of System Configuration
2-57
2
2.7 Completing the Setup
After the Setup Wizard is finished perform, the following procedure.
2.7.1 Generation of System Configuration
The system configuration that has been set up will be generated automatically when the
Setup Wizard has finished (by clicking the OK Button in the Setup Wizard 5: Confirm the
Configuration Window).
The following progress bar will be displayed while the system configuration is automatically
generated.
2.7.2 Setup Completion
When the setup is completed, the following window will be displayed, making it possible to
confirm the completion of the setup.
1. Selecting Next Window
Select the tool to start after completing the Setup Wizard.
1 Return to File Manager will be selected by default if two or more Machine Controllers are set in the
the Setup Wizard 2: Definition Window. In that case, Execute the Engineering Manager cannot be
selected.
2 In any case other than the above, Execute the Engineering Manager will be the default.
1.
2.
INFO