Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 84)

Controller Configuration
3.2.6 System Information
3-14
3
3.2.6 System Information
The System Information Window displays the system software number and running status of
the Machine Controller.
1. System Software Number
The system software number will be displayed when the system is online.
Nothing will be displayed if the system is offline.
2. Running Status
The running status indicates the following six items.
• READY
• RUN
• ALARM
• ERROR
• BATTERY ALARM
• BUS ACCESS
When the system is online, the items corresponding to the running status will be indi-
cated with black circles z.
When the system is offline, all circles will be white.
3.2.7 Servo Status
The Servo Status Window displays the READY status of Servo Modules and I/O Units allo-
cated in Setup Wizard 4: Module Configuration Window.
If a station is ready, it will be indicated with a black circle z.
The number of tabs and tab names in the Servo Status Window vary with the model as
explained below.
„ MP910
Two tabs (01:ch#1 and 02:ch#2) will be always displayed.
1.
2.