Yaskawa MP900 Series Machine Controller Programming Panel for Simple Operation - Manual (Page 20)

Setup Wizard
2.2.2 Definitions
2-8
2
2.2.2 Definitions
The Definition Window is described in detail below.
Fig 2.2 Setup Wizard 2: Definition
1. Define System Modules
Select the name of the module setting template from the drop-down list.
The comments set in the selected module setting template will appear under the box.
1 Select the new user definition when setting a new Module.
2 If there is a registered MP910 module setting template, the defined names will be listed together with a
selection for a new user definition. If a MP910 module setting template has not been registered, only a
selection for a new user definition will appear.
2. Check Box for Modify System Modules
Check the box if the module settings need to be changed.
Changes in the Setup Wizard 4: Module Configuration Window will be possible only if
this box is checked.
The above operation is possible only if a registered module setting template has been selected instead
of a new user definition.
3. Controller Name
Set the name of the Machine Controller.
“01" will be added to the input character string to form the name of the Machine Con-
troller.
Up to six characters can be input for the name. The suffix to be added will be incre-
8.
1.
2.
4.
3.
7. 6. 5.
INFO
INFO