Yaskawa MP900 Series Ladder Programming Manual - Manual (Page 360)

6.6 Viewing Called Programs
6-6
6.6 Viewing Called Programs
You can open a drawing that is called with an SEE instruction or an FUNC instruction.
6.7 Register Lists
You can monitor and edit the current values of the registers in a continuous area on a register list. Realtime monitoring
and editing are possible if the Machine Controller is connected.
Also, if you turn ON display of the register map, registers that are used in the ladder program are displayed with a
green background, and registers that are used for more than one data type are displayed with a red background.
Called drawing: H01 Drawing
You can open called drawings
Calling instruction
You can monitor and edit the current
values of registers in a continuous area.