Yaskawa MP900 Series Ladder Programming Manual - Manual (Page 24)

2.2 Engineering Tool Specifications
2.2.1 Applicable Engineering Tool
2-4
2.2 Engineering Tool Specifications
This section gives the specifications for programs for the Engineering Tool.
2.2.1 Applicable Engineering Tool
You can create ladder programs with the following Engineering Tool.
• MPE720 version 5 for all MP2000-series Machine Controllers except for the MP2400
• MPE720 version 6 for all MP2000-series Machine Controllers
In addition to the Engineering Tool, you can also use the following Support Tools to monitor Machine Controller information
and transfer data.
• MPLOGGER (Control Information Monitoring Tool)
• MPLoader (Data Transfer Tool)
• MPLoadMaker (Automatic Transfer Data Creation Tool)
You can install the Engineering Tool and Support Tools in one PC to use them.
2.2.2 MPE720 Version 6 Engineering Tool Specifications
The following table shows the relationship between the Engineering Tool and the Machine Controller.
The following table shows the relationship between the Engineering Tool and the programs.
INFO
Machine Controller
MPE720 Version 6
(CPMC-MPE770)
Remarks
MP2100 Applicable –
MP2100M Applicable –
MP2101 Applicable Applicable with MPE720 version 6.24 or higher
MP2101M Applicable Applicable with MPE720 version 6.24 or higher
MP2101T Applicable Applicable with MPE720 version 6.24 or higher
MP2101TM Applicable Applicable with MPE720 version 6.24 or higher
MP2200 with CPU-01 Applicable –
MP2200 with CPU-02 Applicable –
MP2200 with CPU-03 Applicable Applicable with MPE720 version 6.20 or higher
MP2200 with CPU-04 Applicable Applicable with MPE720 version 6.22 or higher
MP2300 Applicable –
MP2300S Applicable Applicable with MPE720 version 6.04 or higher
MP2310 Applicable Applicable with MPE720 version 6.04 or higher
MPU-01 Applicable Applicable with MPE720 version 6.23 or higher
Program
MPE720 Version 6
(CPMC-MPE770)
Remarks
Ladder Programs Applicable –
Motion Programs Applicable –
Sequence Programs Applicable –