Yaskawa MP900 Series Ladder Programming Manual - Manual (Page 173)

5.6 Basic Function Instructions
5.6.3 Cosine (COS)
5-104
( 3 ) Programming Examples
The following programming examples demonstrate the COS instruction using integer and real number input data.
• Integer COS
The cosine of 18,000, an integer in the input data in MW00000, is calculated and the result is stored in the output
data in DW00000.
COS (180.00 deg)
× 10,000 → DW00000 = -10,000
• Real Number COS
The cosine of 180.0, a real number in the input data in MF00000, is calculated and the result is stored in the out-
put data in DF00000.
COS (180.0 deg)
→ DF00000 = -1.0