Yaskawa MP900 Series Ladder Programming Manual - Manual (Page 359)

6.4 Checking for Multiple Coils
6-5
Features of the MPE720 Engineering
Tool
6
6.4 Checking for Multiple Coils
You can check for multiple coils (different coils that use the same register) in an entire ladder program, and display the
search results.
6.5 Forcing Coils ON and OFF
You can force a specified coil ON or OFF from the Ladder Editor.
The coil will output ON or OFF regardless of the output of the instruction to the left of the coil.
In the following example, you can simulate turning ON the switch (IB00000) by forcing the DB000001 relay ON even
though the physical switch does not exist.
Multiple coils are displayed.
Coil forced ON.
You can simulate turning ON a switch even
though the physical switch does not exist.