Yaskawa MP900 Series Ladder Programming Manual - Manual (Page 123)

5.3 Numeric Operation Instructions
5.3.18 Binary Conversion (BIN)
5-54
5.3.18 Binary Conversion (BIN)
( 1 ) Operation
The value of the input data is converted from BCD data to binary data and stored in the output data.
If the input data is not BCD data, such as 123F hex, the result of the binary conversion will be incorrect.
( 2 ) Format
∗ C and # registers cannot be used.
( 3 ) Programming Example
In the following programming example, the value 4,660 (1234 hex) in input data A in MW00000 is converted to binary
and stored in the output data in MW00001.
MW00000 = 1234 hex: (1
× 1,000) + (2 × 100) + (3 × 10) + 4 → MW00001 = 1,234
When performing operations with different data types, the result of the operation will depend on the data type of the output reg-
ister.
Refer to 4.4.2 ( 3 ) Precautions When Using Local Registers within a User Function for details.
Output data Input data
Converted to binary.
The output data is computed as shown below when the input BCD data is abcd.
Output data = (a × 1,000) + (b × 100) + (c × 10) + d
Input data Output data
Icon:
Key entry: BIN
Parameter Name
Applicable Data Types
B W L F A Index Constant
Input data (Src) × { { × × { {
Output data (Dest) × { * { * × × { ×
INFO