Yaskawa VS-616G5 Modbus Plus Communication Card - Manual (Page 104)

Data Registers A-24
Drive Parameter Registers (Read/Write) – continued
REGISTER PARAMETER PARAMETER PARAMETER LIMITS / DESCRIPTION INITIAL
(in hex) FUNCTION SETTING VALUE
300h E1-01 Input Voltage Setting 155 to 255V (230V unit)
310 to 510V (460V unit) 230
460
301h E1-02 Motor Selection 0 Std Fan Cooled Gen. Purpose Mtr
(TEFC)
0
1 Blower Cooled Motor
(TENV or TEBC)
302h E1-03 V/f Pattern Selection 0 to E 15 preset V/f patterns
F Custom Pattern
(using E1-04 to E1-10)
F
303h E1-04 Maximum Output Frequency 40.0 to 400.0 Hz 60.0
304h E1-05 Maximum Voltage 0.0 to 255.0V (230V unit)
0.0 to 510.0V (460V unit) 230.0
460.0
305h E1-06 Base Frequency 0.0 to 400.0 Hz 60.0
306h E1-07 Mid. Output Frequency A 0.0 to 400.0 Hz (1)
307h E1-08 Mid Output Voltage A 0.0 to 255.0V (230V unit)
0.0 to 510.0V (460V unit) (1)
308h E1-09 Min. Output Frequency 0.0 to 400.0 Hz (1)
309h E1-10 Min. Output Voltage 0.0 to 255.0V (230V unit)
0.0 to 510.0V (460V unit) (1)
30Ah E1-11 Mid Frequency B 0.0 to 400.0 Hz 0.0
30Bh E1-12 Mid Voltage B 0.0 to 255.0 VAC 0.0
30Ch E1-13 Base Voltage 0.0 to 255.0 VAC 0.0
30Dh Reserved
Notes (for this page only):
(1) Initial Value differs depending on the control method (A1-02).
(2) Initial Value differs depending on drive capacity.