Managing the device, Configuring the device name, Configuring the device name in the web interface – H3C Technologies H3C SecBlade LB Cards User Manual
Page 68
58
Managing the device
Device management includes monitoring the operating status of devices and configuring their running
parameters.
The configuration tasks in this document are order independent. You can perform these tasks in any
order.
The following matrix shows the storage media on different LB products:
Product Storage medium
L1000-A
Flash
LB module
CF card
Configuring the device name
A device name identifies a device in a network and works as the user view prompt at the CLI. For
example, if the device name is Sysname, the user view prompt is
Configuring the device name in the Web interface
1.
Select System > Device Management > Device Basic Info from the navigation tree to enter the page
.
2.
Enter the system name.
3.
Click Apply.
Figure 39 Device basic information
The current system name is displayed on the very top of the navigation tree, as shown in
.
Figure 40 Current system name