Entering system view from user view, Returning to the upper-level view from any view, Returning to user view from any other view – H3C Technologies H3C SecBlade LB Cards User Manual
Page 183: Figure 107
173
Figure 107 CLI view hierarchy
Entering system view from user view
Task Command
Enter system view from user view.
system-view
Returning to the upper-level view from any view
Task Command
Return to the upper-level view from any view.
quit
Executing the quit command in user view terminates your connection to the device.
In public key code view, use the public-key-code end command to return to the upper-level view (public
key view). In public key view, use the peer-public-key end command to return to system view.
Returning to user view from any other view
You can return directly to user view from any other view by using the return command or pressing Ctrl+Z,
instead of using the quit command multiple times.
To return to user view from any other view:
Task Command
Return to user view.
return