H3C Technologies H3C SecBlade LB Cards - Manual (Page 101)

91
Step Command Remarks
4. Exit the basic ACL view. quit N/A
5. Associate the HTTP service
with the ACL.
ip http acl acl-number
Configure either or both of the
commands.
HTTP login and HTTPS login are
separate login methods. To use
HTTPS login, you do not need to
configure HTTP login.
6. Associate the HTTPS service
with the ACL.
ip https acl acl-number
Logging off online Web users
Step Command Remarks
1. Display online Web users. display web users
Optional.
Available in any view.
2. Log off online Web users.
free web-users { all | user-id user-id
| user-name user-name }
Available in user view.
Web login control configuration example
Network requirements
Configure the LB product in Figure 54 to provide Web access service only to Host B.
Figure 54 Network diagram
Configuration procedure
# Create ACL 2000, and configure rule 1 to permit packets sourced from Host B.
system-view
[LB] acl number 2000 match-order config
[LB-acl-basic-2000] rule 1 permit source 10.110.100.52 0
# Associate the ACL with the HTTP service so only the Web users on Host B can access the LB product.
[LB] ip http acl 2000
Host B
10.110.100.52
LB
IP network
Host A
10.110.100.46