H3C Technologies H3C SecBlade LB Cards - Manual (Page 150)

140
Upgrading software
You can use the CLI, BootWare menus, or Web interface to upgrade software. This chapter describes
how to upgrade software from the CLI and Web.
Hardware compatibility
The following matrix shows the storage medium on each LB product:
Product Storage medium
L1000-A Flash
LB module CF card
Overview
Upgrading software includes upgrading the BootWare (called "bootrom" in CLI) and system software.
Each time the device is powered on, it runs the BootWare image to initialize hardware and display
hardware information, and then runs the system software image (called the "boot file" in software code)
so you can access the software features, as shown in Figure 90 .
Figure 90 System startup process
Start
BootWare runs
Press Ctrl+B
Run system
software image
Enter BootWare
menus to upgrade
BootWare or system
software
Yes
No
Select the
Reboot option to
reboot the device
Enter CLI
Finish