H3C Technologies H3C SecBlade LB Cards - Manual (Page 156)

146
Figure 94 Patch states in the patch memory area after a patch file is loaded
ACTIVE state
Patches in ACTIVE state run temporarily in the system and become DEACTIVE after system reboot. For the
seven patches in Figure 94 , if you activate the first five patches, their states change from DEACTIVE to
ACTIVE. The patch states in the system are as shown in Figure 95 .
The patches that are in ACTIVE state change to the DEACTIVE state after a system reboot.
Figure 95 Patches are activated
RUNNING state
After you confirm ACTIVE patches, their states change to RUNNING and persist after a reboot. In
contrast to ACTIVE patches, RUNNING patches continue to take effect after a reboot. For example, if you
confirm the first three patches in
Figure 95 , their state changes from ACTIVE to RUNNING, and the
RUNNING state persists after a reboot. The patch states of the system are shown in Figure 96 .