H3C Technologies H3C SecBlade LB Cards - Manual (Page 114)

104
Figure 69 Network diagram
Configuration procedure
# Create a VD with the name vda and ID 2.
system-view
[LB] vd vda id 2
# Assign interface GigabitEthernet 0/1 to VD vda.
[LB-vd-vda] allocate interface gigabitethernet 0/1
# Assign VLAN 100 to VLAN 205 to VD vda.
[LB-vd-vda] allocate vlan 100 to 205
# Set the maximum number of sessions to 100000 for VD vda.
[LB-vd-vda] limit-resource session max-entries 100000
[LB-vd-vda] quit
# Create a VD with the name vdb and ID 3.
[LB] vd vdb id 3
# Assign interface GigabitEthernet 0/2 to VD vdb.
[LB-vd-vdb] allocate interface gigabitethernet 0/2
# Assign VLAN 50 to VLAN 80, VLAN 400, and VLAN 500 to VLAN 530 to VD vdb.
[LB-vd-vdb] allocate vlan 50 to 80 400 500 to 530
# Set the maximum number of sessions to 200000 for VD vdb.
[LB-vd-vdb] limit-resource session max-entries 200000
Verifying the configuration
Administrators of enterprise A can log in to VD vda, and administrators of enterprise B can log in to VD
vdb. Each enterprise network can use its Layer 3 interface, VLAN resources, and session resources to
communicate with the Internet.