H3C Technologies H3C SecBlade LB Cards - Manual (Page 115)

105
Configuring unified multisystem management
Hardware compatibility
Product Unified multisystem management compatible
L1000-A No
LB module Yes
Overview
You can install a SecBlade LB module into a device to offload the load balancing service from the device.
This module has an independent operating system.
Unified multisystem management enables you to configure SecBlade LB modules in the device's Web
interface.
To implement unified multisystem management, configure the device as the ACSEI server and the
SecBlade LB module as the ACSEI client. After the module registers with the device, the module data
appears on the Device Management tab in the Web interface of the device, as shown in Figure 70 . You
can click the manage link for the module to configure the module.
For more information about ACSEI, see "Logging in to the LB module from the network device."
Figure 70 Unified multi-system management interface
Configuration guidelines
• Configure the unified management VLAN before enabling the ACSEI function.
• Configure the same unified management VLAN for the LB module and S7500E switch.
• Create a local Web user with a privilege user level of 1 on the device and the LB card. For more
information about configuring local users, see Security Configuration Guide.
Configuration procedure
To configure the device: